Posted: 8 March 2018
Having a pool is a major responsibility. To keep that water a pristine blue, you do need to regularly maintain it.
But when done regularly and right, maintaining a pool doesn’t have to be hard or expensive.
Let’s take a look at how to clean a pool and get the most out of it this summer.
Having a pool at your home or business is always a great addition- but don’t forget about maintenance. Keep reading to learn how to clean a pool!
1. Keep an Eye on the Water Level
This will be the easiest tip to apply. But it’s very important to extending the life of your pool. Pools have pumps, filters, and heaters that can last a decade or more. Or you can improperly maintain the water level and burn them up in a day.
If the water is too high then the skimmers can’t do their job. More debris will fall to the bottom and have to be vacuumed out. The same rule applies when maintaining a fish pond.
If the water is too low, it will suck air until the pump making it difficult to stay primed. If the pump loses its prime for an extended period of time, the motor will burn out.
Extra air in the filters will shorten their lifespan significantly.
Water will also evaporate more quickly at a low water level because the jets may be spewing water partially into the air. Unless you have a fountain, those should be completely under water.
There’s no benefit in becoming obsessed with the perfect level. It doesn’t have to be precise. But there is a 3-4 inch sweet spot between which water level is ideal.
It will be different in various pools.
2. Don’t Leave It All to the Robots
When you get a pool, you may be thinking: Wow, I don’t have to know how to clean a pool. The pool bots do it for me.
It’s true that technology has come a long way. But these bots must be maintained. Some of them require regular emptying.
In most cases, these bots should only run 2-3 times a week. Anything else is overkill and will shorten their lifespans.
3. Check Pool Filter Regularly
Check your pool gauge.
If the pressure is well below the lower mark on the gauge, then the filter isn’t working efficiently. You may have forgotten to open a valve or the pump is struggling to maintain a prime.
Don’t allow these to go on too long.
If it’s running too high then the filter is dirty. Clean it!
Allowing a filter to run at higher than its recommended max pressure can warp and crack the internal pieces. If the pressure gets too high, the filter’s casing could explode.
As if that weren’t bad enough. A filter that’s running on high pressure is also less energy efficient. You’re using more electricity to maintain the pool.
4. Power Wash Your Cartridge Filters
You can save yourself a lot of time and hassle by using a hose extension that creates a jet of water.
Remove the filters.
For best results, wash them immediately even if you have a backup set. Otherwise, debris solidifies and is hard to remove.
That’s how to clean a pool the hard way so avoid if possible.
Spray with a degreaser or other cleaning spray and then go over the entire filter several times in slow, even strokes to dislodge any debris. Rinse thoroughly.
Allow them to mostly dry before re-inserting them.
If you have a sand filter, you’ll need to backwash the filter instead.
5. Get Obsessed With a Balanced Pool
It’s easy to maintain a balanced pool. But it costs a lot of time and money to re-balance a pool if you let it go.
Get on a schedule. Check your chlorine and pH at least weekly. 2-3 times a week is best.
Always have chemicals on hand to make adjustments. Don’t wait.
Scrape the sides/bottom and shock it once a week around sunset. Keep chlorine tabs in the skimmer for a sustained release of chlorine. Use algaecide each week to slow the growth of algae.
If you’ll be gone on vacation for a week, always shock it before you go. If you’ll be hiking in Asia for two weeks, hire someone to maintain it.
Here’s the thing about pH. If it’s too low, then chlorine is very inefficient. You’ll have to spend more money on chlorine.
On top of this, low pH pool means high acid. Acid will erode your pool leading to the need for pool resurfacing or repair through companies like Texas Fiberglass Pools Inc.
Swimmers will also get itchy.
High pH makes chlorine stop working at all. Bacteria, viruses, and algae can grow freely. That’s a health hazard.
Keeping it balanced matters.
If you have a saltwater pool, note that instructions will be a little different.
6. Manage Outbreaks Like a Pro
Despite your best efforts, you may have an algae outbreak. This is when the water actually turns green.
When you experience this, know that the best thing you can do is throw everything you can at it to get rid of it quickly. If you try to conserve, you’ll end up spending more.
You can’t over-chlorinate a pool when you’re trying to kill an algae explosion.
Balance the pH first so that the chlorine will be most effective. Scrape the sides and bottom even if you can’t see them.
Double up on shock and shock it every night until the pool starts to clear. If you caught it early, 3 days should do it. If you let a frog pond develop, then you might need 7 or more days.
7. Get Professional Help
If you’re having troubling figuring out how to clean a pool effectively, then you may be spending more on chemicals and time than you should. Check into options in your area.
This may be the best way to save time and money.
How to Clean a Pool & More
With this tips on how to clean a pool, you can maintain a pristine pool with less effort. Balance is important. And no pool stays clean with bots alone.
For more tips and tricks, follow our blog.